There is nothing quite like a tile floor. They look nice, they're pretty easy to maintain and they are reasonably easy to install. You need only a basic amount of do it yourself experience to lay your own floor and it can give you a great feeling of accomplishment when you're done. You will need a few tools and materials to get started. They include:
- caulk
- floor cement
- lathe
- scraper
- the tiles
- a wetsaw or tile snipper
- some gloves
You'll need to decide whether to rip out your old floor or put your tile above it. We recommend completely removing the old floor for the best results. If it is an old tile floor, you'll need to spend some time chipping and chiseling away. For carpet, pull up the carpet and pad, to reveal the subfloor underneath. Sweep up any debris and sand down any rough spots. For floors with linoleum or peel and paste tiles, you'll need to rip all of these up. It's actually more work to remove the old flooring than it is to lay the new one, so don't worry, it gets easier from here.
Read Another Article: Add Paint or Wallpaper to your home’s walls?
Once you've got the floor bare and prepared (ie: sanded, scrubbed and swept) you're ready to start. Remember, you don't want to cement yourself in a corner. Don't get too carried away - just take it one row at a time. By taking your time and laying each tile carefully, you'll be a lot happier with the results. Measure off each row and determine how many tiles you'll be using. This will change since there will be some space in between, so don't cut any tiles to fit just yet.
Mix your cement and spread it on the subfloor for the first row. Take your first tile and carefully place it into the cement. Press down firmly and move to the next tile. You should leave a little room in between each, but no more than ½ an inch. Put this tile down and continue until you reach the end of row. Ideally, it will be a perfect fit, but this rarely happens. Measure off the space and then either cut the tile in the wetsaw or use your snipper. Place this piece in and move to the next row.
Keep going until you have the whole room finished. If you're going around curves or fixtures, you may want to get a template to make cutting the tile easier. Plan this out ahead of time so you don't end up with any surprises. The amount of time it takes for the tile to set will depend on your cement. Make sure that you follow the instructions and leave the floor alone to cure - no activity on it until it is done! Caulk any sides that may come into contact with water, and if necessary, caulk any gaps in between the tiles.
Read Another Article : How to Keep Home Repair Costs Down
How to Lay A Tile Floor
4/
5
Oleh
aaron
