How to Do Home Window Installation

How to Do Home Window Installation

Home Tips Home Window

How to Do Home Window Installation 

Replacing and installing windows can seem like a daunting and expensive task, but it can actually be incredibly simple to do yourself. When you do your own home window installation, you’ll be greatly cutting down on the costs since most of the cost of having windows installed is the labor. If you have a basic toolbox, you can easily replace windows, or install brand new windows if you can cut out a rough opening.

If you want to replace your windows, the easiest way to go about it would be to get the model of the windows you currently have installed. If you can, also be write down the measurements of the window and get them to be as accurate as possible. Any home window installation place or home improvement store will have information about your window and can help you find another window that will fit in the same space. If for any reason they don’t have your window model in their registry, the measurements you took will be able to help them find the right window for you. To install brand new windows, you might find it easier to buy the window you are interested in first and then measure out what you are cutting based on the measurements of the window.


Read Also : Closing Down a House for the Winter

Either way, you’ll need moisture seal to place around the edges of where you will be mounting the new window. Make sure the seal goes all the way around the edges and goes right up against the inside edge near the opening. You’ll then want to install shims at the base of where the window will go. They must be level and cut to be even with the opening. If there are already shims in place, you should examine how they look before removing them so you know what yours should look like. Even if there are already window seals and shims in place, you will want to replace them with new ones each time you do a home window installation.

Once you’ve got your foundations laid out, it’s time to put in the window. Place the window in the certain of the opening. Make sure it is as even as possible on all sides and use a nail in one corner of the trim to help keep it in place. When you have the nail in, you can take the time to see if the window is level. Your home window installation should be as accurate as possible so you don’t need to redo it later on.

When the window is level, you can continue nailing the trim. You will want to use caulk around the edges to fill in any holes or cracks that might be left between the siding and the window. Every window is slightly different and there may be special instructions for your window and how to properly caulk it. After the caulk is dry, go back through one more time to ensure that there is no air getting through the window when it is closed. If there isn’t you can remove any protective coverings your window might have had because you have successfully installed your window.

Read Also : The Basics of Drilling How To Operate The Drill

The Basics of Drilling How To Operate The Drill

The Basics of Drilling How To Operate The Drill

Home Tools

The Basics of Drilling How To Operate The Drill 

Hold the drill properly! If you want to drill a much straighter hole and to avoid breaking your drill bits, you need to hold the drill in such a way that the force you are exerting is going to help you push the bit directly straight into the wall. You should be placing the palm of your hand so that it is line with the drill chuck and you should be extending your index finger so that it is along the length of the body of the drill. You should pull the trigger using your second finger rather than your first.

Keep the drill level! You will find that newer power drills often come equipped with between one and two levels built in, in order to help you drill holes that are straight and perpendicular. To upgrade a drill that is older, simply cut the hooks off of a mason's line level and then attach it right to the top of your older drill using common every day duct tape.

Read Also : The Basics of Drilling: Buying A Drill


Hole Starters: In order for you to keep the bit from skating all over the place when you are starting a hole in most types of materials including wood, you can draw your cross marks where you are planning on drilling. Now use a center punch to create a dimple right where the cross marks intersect. Now you can use a star drill if you are dealing with masonry building or any other drill to suit your needs. If you are working with ceramic tile on the other hand then what you are going to want to do is to use a carbide masonry drill bit to scratch an x where you want the drill to create a hole.

How deep to go? When you are drilling to a specific precise depth, you should be marking the depth on the actual Drill Bits">drill bit using a small piece of masking tape. You can cut the piece long and then stick the overlapping ends to one another in order to create a little flag. When you have reached the right depth with your drill, the flag will automatically brush the debris away for you, serving two purposes at once.

Choosing the right sized bit. If you need to drill a clearance hole to suit a bolt or a screw, but you do not have a drill gauge at hand, what do you do? You can use the fastener itself along with the chuck of the drill in order to gauge the right diameter for the bit that you need. Chuck the fastener just lightly into the drill that you will be using, and then remove the fastener without making any adjustments to the chuck's setting. You can dry shanks of different bits until you find the bit that fits in snugly and securely.

Read Also : Closing Down a House for the Winter

Closing Down a House for the Winter

Home Safe Home Tips

Closing Down a House for the Winter

Whether you have a vacation home that will not be in use for the winter, or you will be gone from your home for an extended period of time this season, it is a good idea to properly close up your home for the winter. This is not difficult and the steps you take here can save you thousands of dollars by preventing burst pipes, water damage and other damage. Here is a quick checklist to help you get prepared.

1. Drain the water heater and the pipes.
This is something that many homeowners forget, but it is the most important step to take and should be done before anything else. If you don’t get rid of excess water in your pipes, plumbing and water heater, there is a chance that they could freeze. Since you won’t be at the home, you may never know what happened until it is too late. If you are not used to flushing your home’s plumbing system, you can easily hire a plumber to help with this job. Once everything has been flushed, double check to make sure that the main water line to the house has been shut off.

Some people recommend adding antifreeze to toilet water, but this is a hazard, particularly if you have pets and small children. It is best simply to flush the house system and close down the water line for the winter.


Read Also : The Basics of Drilling: Buying A Drill

2. Seal all the windows.
In order to keep the temperature at a constant level, it’s a good idea to seal up and winterize all of your windows and doors. This can save you money on heating an extra home throughout the winter and will help keep the interior less dusty. You can purchase window and door sealing kits at your local hardware store and do this on your own.

3. Set your furnace to the desired level.
If you don’t mind heating the house all winter long, or if you haven’t completely flushed the house water system, you will need to make sure that you leave the heat on. Most people prefer to set the heat at about 50 to 60 degrees to keep it above freezing. This should reduce the cost for heating the house throughout the winter. If you prefer to just turn everything off, double check and make sure that no water is left in the pipes before you do.

Turn off the electricity.
If you will not be using the heating system, you can simply turn off the electricity for this portion of the year. Many people feel more comfortable doing this, since they won’t have to worry about electrical fires if something happens when they are not at the house. Talk with your power company about shutting down for the winter. If you have propane or natural gas lines in the home, you should also have those shut down for the winter.

These easy steps will help you make sure that your house is safe and sound for the winter and will be ready for you next spring.

Read Also : 6 Inexpensive Ideas for Living Rooms